 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1 - 1 plastic
2 gallon kit 1 - 1 plastic bucket
10 gallon kit 1 - 1 plastic
Engineering Materials - General Purpose - Adhesives and Sealants
Details: R33-2186 - Two-part, translucent, thixotropic, high tear strength silicone system
| Product Profile: | R33-2186.pdf |
|---|---|
| MSDS PDF A: | R33-2186_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Adhesives and Sealants |
| NuSil ID: | R33-2186 |
| Solids Content: | - - |
| Cure Time/Temp: | 24 H / R.T. |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.12 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 20 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 1,000 |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 6.9 |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 725 |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | 150 |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | 26.5 |
| Lap Shear psi/Mpa: | - - |
| Dielectric Strength V/mil: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Two-part, translucent, thixotropic, high tear strength silicone system |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
