Section: | Description: | NuSil_ID: | Cure_System: | Comments: |
---|---|---|---|---|
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Materia | CV4-2500 | PT Addition | 1.41 Refractive Index Low Durometer |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV-2500 | Platinum | Pourable, Primed Lap Shear 400 psi optically clear silicone |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV-2502 | Platinum | Two-part, thixotropic, translucent RTV silicone |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV1-2500 | Optically clear silicone system Very low durometer | |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV1-2502 | Thixotropic florescent silicone | |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV10-2500 | Platinum | Two-part 1:1 mix ratio optically clear silicone system |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV11-2500 | Two-part optically clear silicone system | |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV14-2500 | PT Addition | Primerless Adhesion |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV15-2500 | PT Addition | 1.40 Refractive Index Primed Lap Shear 225psi (1.58 MPa) |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV16-2500 | PT Addition | 1.43 Refractive Index Low/High Temp Primed Lap Shear 160psi (1.1 MPa) |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV2-2500 | Two-part optically clear silicone system | |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV3-2500 | Platinum | Two-part, low viscosity, optically clear silicone |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV4-2502 | Platinum | Two-part thixotropic florescent silicone UV Tracer |
Engineering Materials - Controlled Volatility | Optically Clear Potting and Encapsulating Material | CV8-2500-1 | Low viscosity broad operating temperature range | |
Engineering Materials - General Purpose | Adhesives and Sealants | CF1-6755 | PT Addition | Tough elastomer optically clear, silicone system that pours |
Engineering Materials - General Purpose | Adhesives and Sealants | R-1600 | Oxime | High - Low Temperature 115 C to 260 C, RTV, good optical clarity |
Engineering Materials - General Purpose | Optically Clear Potting and Encapsulating Material | CF19-2615 | PT Addition | Low viscosity optically clear, solvent free |
Engineering Materials - General Purpose | Optically Clear Potting and Encapsulating Material | R-2652 | PT Addition | Low durometer 65 type "00" Fast cure at 25 C |
Engineering Materials - General Purpose | Optically Clear Potting and Encapsulating Material | R-2655 | PT Addition | 260 C High and low temp elastomer. High refractive index 1.46 |
Engineering Materials - General Purpose | Potting and Encapsulating Gels | GEL-8100 | PT Addition | Optically Clear Medium Penetration 9.7mm, low viscosity, long work time |
Engineering Materials - General Purpose | Potting and Encapsulating Gels | GEL-8136 | Platinum Cure | Optically clear embedding or potting compound for protection of electronic assemblies |
Engineering Materials - General Purpose | Potting and Encapsulating Gels | GEL-8150 | PT Addition | Fim Penetration 5mm, heat cure, low viscosity, optically clear, low cost |
Engineering Materials - General Purpose | Potting and Encapsulating Gels | GEL-8250 | PT Addition | Optically Clear Low / High temperature Penetration 0.5mm |
Engineering Materials - General Purpose | Potting and Encapsulating Materials | CF-2616 | - - | Two-part, optically clear, solvent free, low viscosity silicone |
Engineering Materials - Lightspan | Optical Adhesive | LS-6946 | PT Addition | Primed Lap Shear 500psi Young's Modulus 425psi |
Engineering Materials - Lightspan | Optical Adhesive | LS1-6946 | Platinum Addition | Improved adhesion Two-part, optically clear silicone. R.I. 1.46 |
Engineering Materials - Lightspan | Optical Adhesive | LS2-6140 | Platinum Addition | Primerless Adhesion Silicone Encapsulant for Optical Applications Requires heat to cure |
Engineering Materials - Lightspan | Optical Elastomer | LS2-6941 | - - | Two-part, optically clear, solvent free, low viscosity silicone |
Engineering Materials - Lightspan | Optical Fluid | LS-5238 | Non-curing | Chemically inert, optical grade fluid |
Engineering Materials - Lightspan | Optical Fluid | LS-5246 | Non-Curing | Low volatility. Chemically inert, optical grade fluid. 1.46 refractive index |
Engineering Materials - Lightspan | Optical Fluid | LS-5252 | Non-Curing | Chemically inert, optical grade fluid. Optically clear, visible to NIR. R.I 1.52, index ma |
Engineering Materials - Lightspan | Optical Fluid | LS-5257 | Non-Curing | Chemically inert, optical grade fluid. Optically clear, visible to NIR. |
Engineering Materials - Lightspan | Optical Gels | LS-3140 | Low Outgassing; Heat & UV Resistant; Medium Firm Gel | |
Engineering Materials - Lightspan | Optical Gels | LS-3238 | PT Addition | Encapsulation Gel Fuel Resistant, R.I. 1.38 |
Engineering Materials - Lightspan | Optical Gels | LS-3246 | PT Addition | Encapsulation gel Surface Tack 5.3psi, R.I. 1.46, long work time |
Engineering Materials - Lightspan | Optical Gels | LS-3351 | Platinum Addition | A two-part, encapsulation gel - For LEDs and displays. |
Engineering Materials - Lightspan | Optical Gels | LS-3354 | Platinum Addition | High purity, optically clear, soft silicone gel. R.I. 1.54, work time 1.5 hours minimium, |
Engineering Materials - Lightspan | Optical Gels | LS-3440 | PT Addition | Very Soft Penetration 0.9mm. R.I. 1.40, very low viscosity, long pot life, heat cure |
Engineering Materials - Lightspan | Optical Gels | LS-3441 | PT Addition | Firm and tacky gel. Penetration 0.4mm. R. I. 1.41 Temp range -65 C to +200 C |
Engineering Materials - Lightspan | Optical Gels | LS1-3252 | PT Addition | Optically clear materials with a refractive index of 1.52 at 589 nm |
Engineering Materials - Lightspan | Optical Gels | LS1-3443 | Optically clear silicone gel for protection of sensitive photonics assemblies. | |
Engineering Materials - Lightspan | Optical Gels | LS3-3354 | Platinum Addition | High purity, optically clear, soft silicone gel. |
Engineering Materials - Lightspan | Optical Primers | LS-3200-10 | Optical grade adhesion promoter, non-flammable non-toxic optical grade solvent | |
Engineering Materials - Lightspan | Optical Primers | LS1-3200 | Hydrolysis | Specially formulated, optical primer for optical platinum-cured systems |
Engineering Materials - Lightspan | Optical Primers | LS2-3200 | Hydrolysis | Specially formulated, optical primer for optical platinum-cured systems |
Engineering Materials - Lightspan | Optical Primers | LS3-3200 | Hydrolysis | Specially formulated, optical primer for optical platinum-cured systems |
Engineering Materials - Lightspan | Optical Thermosets | LS-6140 | PT Addition | Low Outgassed |
Engineering Materials - Lightspan | Optical Thermosets | LS-6143 | PT Addition | Low Outgassed |
Engineering Materials - Lightspan | Optical Thermosets | LS-6941 | PT Addition | Tensile 1300psi, RTV, low viscosity. R.I. 1.41 |
Engineering Materials - Lightspan | Optical Thermosets | LS-6943 | PT Addition | Tensile 800psi Scorch Time 1.87 in. T90 2.79 min |
Engineering Materials - Lightspan | Optical Thermosets | LS-8941 | PT Addition | High durometer silicone lens non-phenyl |
Engineering Materials - Lightspan | Optical Thermosets | LS1-6140 | Optically clear silicone system | |
Engineering Materials - Lightspan | Optical Thermosets | LS1-6941 | PT Addition | Pourable Optically Clear Tough Tensile 1 200psi Tear 75ppi |
Engineering Materials - Lightspan | Optical Thermosets | LS1-6943 | PT Addition | Fast Cure |
Engineering Materials - Lightspan | Transparent Thixotropic Gels | LS-1246 | Non-curing | Thixotropic ultra-clear optical grease Flows under pressure but non-slumping at rest |
Engineering Materials - Lightspan | Transparent Thixotropic Gels | LS-1246-10 | A thixotropic, one-part, ultra-clear optical gel. Flows under pressure. R.I. 1.46 | |
Engineering Materials - Space | SCV Ultra Low Outgassing | SCV-2590 | Two-part, optically clear silicone system | |
Engineering Materials - Space | SCV Ultra Low Outgassing | SCV1-2590 | Two-part, optically clear silicone system Low viscosity | |
Healthcare Materials - Restricted | Gels | MED-6321 | - - | Two-component low viscosity optically clear liquids blend easily to silicone gel |
Healthcare Materials - Restricted | Gels | MED-6322 | An optically clear silicone gel manufactured under controlled conditions | |
Healthcare Materials - Restricted | Gels | MED-6342 | Platinum Addition | Medium Firmness, Tacky, Silicone Gel high purity, optically |
Healthcare Materials - Restricted | Gels | MED-6370 | High purity, optically clear, medium to firm silicone gel | |
Healthcare Materials - Restricted | Gels | MED3-6320 | - - | Optically clear 2 part silicone gel system of low viscosity liquids that blend easily |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-4917 | Platinum Addition | 1.43 R.I. Optically clear |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6010 | Platinum Addition | 1.43 R.I. Optically Clear |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6015 | Platinum Addition | Two-part, optically clear, solvent free, low viscosity silicone elastomer |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6019 | Platinum Addition | Low Viscosity - High Durometer - Flowable two-part optically clear |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6020 | Platinum Addition | 1.43 RI Optically Clear |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6021 | Pourable optically clear two-part silicone for molding potting and coating applications | |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6033 | Platinum Addition | 1.41 R.I. Optically Clear Low Viscosity |
Healthcare Materials - Restricted | Low-Consistency Elastomers | MED-6755 | Platinum Addition | 1.46 R.I. Optically Clear |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6210 | Platinum Addition | 1.43 R.I. Optically Clear |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6215 | Platinum Addition | Two-part, optically clear, solvent free, low viscosity silicone elastomer |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6219 | Platinum Addition | Flowable, two-part, optically clear, Low Viscosity - High Durometer Silicone Elastomer |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6221 | Pourable optically clear two-part silicone for molding, potting and coating applications | |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6233 | Platinum Addition | 1.41 R.I. Optically Clear Low Viscosity |
Healthcare Materials - Unrestricted | Low-Consistency Elastomers | MED-6820 | Platinum Addition | 1.43 RI Optically Clear |